Sistema a vela 11.3

BALLAST ANGLE 10° SAIL-SHAPED SYSTEM

BALLAST ANGLE 10° SAIL-SHAPED SYSTEM

The 10° Sail-Shaped Ballast fixing system in the Sun Ballast line is made from unreinforced concrete triangles that allow a tilt angle of 10°. It has XC4 exposure class, as well as a strength class of C32/40.

Art. 23010

Art. 23010

Art. 23010.2

Art. 23010.2

Art. 23010.3

Art. 23010.3

Application

Any type of flat or low-pitched roof with up to 5° slope, on the ground, on hard court with inert material or on paving

Module inclination
10°
Quantity per pallet
10
Ballast weight
60 Kg
Pallet dimensions
100 cm x 73 cm h = 67 cm
Distance between panels
From 50 cm to 70 cm
Total pallet weight
630 Kg
Orientation of the PV module
Horizontal and vertical
PV panel size
To be communicated: Standard 1650x1000 panel or similar.
Application

Any type of flat or low-pitched roof with up to 5° slope, on the ground, on hard court with inert material or on paving

Module inclination
10°
Quantity per pallet
8
Ballast weight
60 Kg
Pallet dimensions
109 cm x 56 cm h = 72 cm
Distance between panels
From 50 cm to 70 cm
Total pallet weight
510 Kg
Orientation of the PV module
Horizontal and vertical
PV panel size
To be communicated: Standard 1650x1000 panel or similar.
Application

Any type of flat or low-pitched roof with up to 5° slope, on the ground, on hard court with inert material or on paving

Module inclination
10°
Quantity per pallet
8
Ballast weight
65 Kg
Pallet dimensions
112 cm x 56 cm h = 66 cm
Distance between panels
From 50 cm to 70 cm
Total pallet weight
557 Kg
Orientation of the PV module
Horizontal and vertical
PV panel size
To be communicated: Standard 1650x1000 panel or similar.
CONTACT US TO FIND OUT MORE
Document Thambnail

Download Technical Sheet

1.14 Mb

10°.3 BALLAST

The Sun Ballast multiple assembly system is a basic system designed to cope with problems of overall dimensions, bad exposure and space.

An array of three panels eliminates the problem of shadowing that steals space and allows the use of a greater number of modules. In this way, although equal to a flat surface, the system’s power increases. One can get to earn 25% more space.

The exclusive Sun Ballast 10°.3 array system for horizontal installation allows the system to increase its power with arrays from 2 to 3 panels depending on requirements, thus optimizing spaces.

Shading and space problems are also solved with Sun Ballast 0°, the 5°.6 array system with 3 horizontal modules and east/west installation.

Can I have the details about the pallets?

Of course, please send an email to logistica@sunballast.com including the reference number of your order.

Is it possible to ground your system?

Yes, it can be grounded by means of connecting 2 panels as explained in the execution standard or using accessories (e.g. terminal and central braces) certified for grounding.

How long is your buckle?

Our buckle has a screw thread ≈ 3 cm long.

Can I install rails on your ballasts?

Yes.

Can I install solar thermal panels on your ballasts?

Yes, the technicians will suggest you the best solution after receiving the technical sheet and the assembly instructions of the panel.

Can I install the panels glass-glass?

Yes, by using the rails.

Is it possible to have a ballast produced according to our dimensional requirements?

Yes it is, we also produce custom ballasts to meet our clients’ needs.

Can I have black ballasts?

Yes, the minimum order is 1 pallet.

How long does the shipment take?

As soon as we receive the complete order (i.e. signed order, with delivery address + bank transfer report) we set shipment and delivery in 2/3 working days for northern Italy, 3/4 working days for central Italy, 4/5 working days for southern Italy/islands, 5/6 working days abroad.

Please note: for orders over €1500 we also have to wait for the credit to be transferred on our bank account.

Can you deliver the material on a vehicle with tail lift, as we do not have the equipment to unload the pallets?

Of course, we can send you a vehicle with hydraulic tail to unload the pallets.

Please note: we can do it up to 15/20 pallets; for larger amounts we supply a semi-truck, which is not provided with hydraulic tail.

Is there iron in the ballast?

Yes, in our ballasts there are 1-2 iron bars that enhance the resistance in handling and transport; should our ballast be damaged during the shipment (i.e. minute cracks occurring in the surface), it can be used anyway.

Is the buckle in the ballast in stainless steel?

No, it is made of zinc plated steel, as it permits to redo the thread if it strips while screwing (using the male screw M8)

Is it possible to drill the ballast?

Yes, our ballast can be drilled to insert Ø 9 mm expansion buckles. We recommend you to drill the ballasts in the central part.

What can I do if the buckle is oxydised?

Apply lubricant (e.g. WD40) or grease on the buckle.

Can I install the ballasts on any kind of flat surface?

Yes, our ballast can be installed on gravel, green roof, tarmac, concrete, ground.

What is the maximum tilt of the roof on which your system can be installed?

It can be installed on any roof with a maximum tilt of +5° or -5°.

Icon quotation

Request now a

Custom Quote

Ask a quotation!
Icon support

You need

Technical assistance?

CONTACT US NOW
Loader Gif
Loader Gif
Loader Gif
Loader Gif